BLADE BOLT Type | 647776-00
General Details
| Status | Active |
| Substitute Part Number | |
| Variant Description | M8 X 20 LH T40 |
Download Area / Documents
Where Part is Used
| Item No. | Qty Per | Product Number | Product Description | Type | Other Info | Markets | Product Status | Last Date of Manuf. | Diagram |
|---|---|---|---|---|---|---|---|---|---|
| 8 | 1 | AT35 | CUT OUT TOOL | H1 | B9 | Discontinued | 30/08/2016 |
|
|
| 8 | 1 | AT35 | CUT OUT TOOL | H1 | GB | Discontinued | 30/08/2016 |
|
|
| 8 | 1 | AT35 | CUT OUT TOOL | H1 | B1 | Discontinued |
|
||
| 165 | 1 | D27107 | COMBINATION SAW | 5 | Type change to accommodate the new Pulley fixing design. Heat is used to expand the pulley before pressing to Armature and Gear shafts. | GB | Discontinued | 20/06/2014 |
|
| 165 | 1 | D27107 | COMBINATION SAW | 7 | FIELD PROCESS IMPROVEMENT NT338 | GB | Live |
|
|
| 165 | 1 | D27107 | COMBINATION SAW | 6 | Changes made to Guarding & Riving Knife. No user manual in windchill for this type change as at 20-06-2014 NT275 | GB | Live |
|
|
| 165 | 1 | D27107XPS | COMBINATION SAW | 4 | Changes made to Guarding & Riving Knife. No user manual in windchill for this type change as at 20-06-2014 NT275 GB+LX - Discontinued via 2017 global NOD list = 17-11-17 | GB | Discontinued | 17/11/2017 |
|
| 165 | 1 | D27107XPS | COMBINATION SAW | 3 | Type change to accommodate the new Pulley fixing design. Heat is used to expand the pulley before pressing to Armature and Gear shafts. GB + LX = NOD 425 (Serviceability returned just N203384 Rting plate-GB = Added to type change review) | GB | Discontinued | 20/06/2014 |
|
| 147 | 1 | D27111 | TABLE TOP MITRE SAW | 1 | Items 147,35 and 175 changed in 2006 41 11 NOD 267 = GB | GB | Discontinued | 01/08/2012 |
|
| 147 | 1 | D27112 | TABLE TOP MITRE SAW | 1 | GB + LX = NOD 339 (17-05-12) - Serviceability done | GB | Discontinued | 01/08/2012 |
|
| 147 | 1 | D27112 | TABLE TOP MITRE SAW | 2 | Type 2 changed Guard + Material clamp added. NOD 339 (17-05-12) = GB + LX - Serviceability done NOD 366 = CH (Not structured) NOD 569 = D27112KIT-QS + D27112L-IT + D27112SET Item number 149 updated - 616319-00 updated to N186624 becuase it's wrong | GB | Live |
|
|
| 147 | 1 | D27112 | TABLE TOP MITRE SAW | 3 | FIELD PROCESS IMPROVEMENT NT336 Item number 149 updated - 616319-00 updated to N186624 because it's wrong | GB | Live |
|
|
| 312 | 1 | D27113 | TABLE TOP MITRE SAW | 3 | FIELD PROCESS IMPROVEMENT NT337 From: Riccomini, Roberto Sent: Thursday, November 14, 2019 12:38 PM To: Rosseel, Stijn <Stijn.Rosseel@sbdinc.com> Subject: RE: N142444 We are producing D27113-QS. But this item is a component of D27113-LX and this FG is dead (2012) | GB | Live |
|
|
| 312 | 1 | D27113 | TABLE TOP MITRE SAW | 1 | GB | Discontinued | 30/09/2015 |
|
|
| 312 | 1 | D27113 | TABLE TOP MITRE SAW | 2 | From: Riccomini, Roberto Sent: Thursday, November 14, 2019 12:38 PM To: Rosseel, Stijn <Stijn.Rosseel@sbdinc.com> Subject: RE: N142444 We are producing D27113-QS. But this item is a component of D27113-LX and this FG is dead (2012) | GB | Live |
|
|
| 26 | 1 | DCS365 | MITRE SAW | 1 | Cordless Mitre Saw. Motor top half is manufactured by Reynosa and shipped to Tatry for assembly onto the Base. Top Half parts are not supported from Tatry only from Fort Mill. The Base is supported by Tatry. Still need wiring harness programmed from reynosa (Item 9) N466092 DCS365M2-XE = 2018 Global NOD List - WK32 | GB | Live |
|
|
| 23 | 1 | DHS780 | MITRE SAW | 20 | 2 X 54 VOLT MITRESAW - MAIN UNIT FROM CHANG TYPE MOTOR PUMPKIN PARTS FROM SUZHOU PROF DHS780T2A-GB+LX - Discontinued via the 2017 global NOD list | GB | Live |
|
|
| 121 | 1 | DW712N | MITRE SAW | 3 | Type change to cover, Change to the Guard + Material Clamp. GB + LX obsoleted on NOD 267 NT320 | GB | Discontinued | 28/02/2017 |
|
| 121 | 1 | DW712N | MITRE SAW | 2 | GB + LX obsoleted on NOD 267 | GB | Discontinued | 09/07/2012 |
|
| 251 | 1 | DW713 | MITRE SAW | 2 | GB + LX - Obsoleted on NOD 252 NOD 413 | B1 | Discontinued | 31/03/2011 |
|
