SCREW Type | 330019-12
General Details
| Status | Active |
| Substitute Part Number | |
| Variant Description | n/a |
Download Area / Documents
Where Part is Used
| Item No. | Qty Per | Product Number | Product Description | Type | Other Info | Markets | Product Status | Last Date of Manuf. | Diagram |
|---|---|---|---|---|---|---|---|---|---|
| 13 | 1 | BDCROS18 | RANDOM ORBITAL SANDER | 1 | GB | Live |
|
||
| 11 | 4 | BEBL185 | BLOWER | 1 | GB | Live |
|
||
| 3 | 1 | DCM563 | HEDGE TRIMMER | 1 | GB | Live |
|
||
| 40 | 1 | DCM565 | CHAINSAW | 1 | DCM565P1 comes loaded with Battery and Charger / Only difference between the two Aaron 25-9-17 | GB | Live |
|
|
| 40 | 1 | DCM565 | CHAINSAW | 2 | GB | Live |
|
||
| 3 | 1 | DCMHT563 | HEDGE TRIMMER | 1 | CMHT563N-XE | GB | Live |
|
|
| 6 | 21 | DCMW564 | MOWER | 2 | flexvolt battery needs to be added. P/N N750730 or N632052 DCMW564N-TYPE 2 2*18V 20" LAWN MOWER BARE Bare unit XE, XJ DCMW564P2-TYPE 2 2*18V 20" LAWN MOWER With 2X 20V 5.0ah batteries GB, QW, XE DCMW564RN-TYPE 2 2*18V 20" LAWN MOWER BARE Bare unit with a roller under the deck GB DCMW564T2-TYPE 2 2*18V 20" LAWN MOWER FLEXVOLT With 2x6AH FLEXVOLT BATTERIES XE NO TYPE 2 PRODUCT IMAGE TYPE 1 EXPLODED DRAWING NEEDS ADAPTING - ONLY HANDLE SA HAS CHANGED. ASKED ENGINEER FOR WHOLE HANDLE SA P/N? | GB | Live |
|
|
| 6 | 21 | DCMW564 | MOWER | 1 | GB | Live |
|
||
| 10 | 1 | DCS365 | MITRE SAW | 1 | Cordless Mitre Saw. Motor top half is manufactured by Reynosa and shipped to Tatry for assembly onto the Base. Top Half parts are not supported from Tatry only from Fort Mill. The Base is supported by Tatry. Still need wiring harness programmed from reynosa (Item 9) N466092 DCS365M2-XE = 2018 Global NOD List - WK32 | GB | Live |
|
|
| 10 | 1 | DCS365M2 | 18V MITER SAW | 1 | GB | Live |
|
||
| 41 | 2 | DCS577 | CORDLESS CIRCULAR SAW | 2 | GB | Live |
|
||
| 41 | 2 | DCS577 | CORDLESS CIRCULAR SAW | 1 | GB | Live |
|
||
| 29 | 1 | DCS727 | MITRE SAW | 1 | KIT FOR BOTH SIDE HANDLE EXTENSIONS IS N714377 IF NEEDED - SET UP INDIVIDUALLY kit for screws and washers for side handle = N714372 - set up individually GB UNIT TAKE EURO MANUAL 02/09/2019 KR MANUAL N774988 - NO DOC 01/10/2019 | GB | Live |
|
|
| 127 | 1 | DCS727 | MITRE SAW | 1 | KIT FOR BOTH SIDE HANDLE EXTENSIONS IS N714377 IF NEEDED - SET UP INDIVIDUALLY kit for screws and washers for side handle = N714372 - set up individually GB UNIT TAKE EURO MANUAL 02/09/2019 KR MANUAL N774988 - NO DOC 01/10/2019 | GB | Live |
|
|
| 302 | 2 | DCS7485 | TABLE SAW | 1 | CHUI TING MAKE MAIN UNIT APART FROM THE MOTOR AND SWITCH WHICH COMES FROM SUZHOU PROFESSIONAL -switch N446219 is not available as spare part but US take the part direct from supplier Defond (20015756) so may be able to get through Fort Mill if needed - check with supply team if can go direct to Defond Item N446219 has been discontinued in Fort Mill and replaced by N474607 (complete stator and module Item 332) Cindy.Munters 16.08.18 | GB | Live |
|
|
| 308 | 4 | DCS7485 | TABLE SAW | 1 | CHUI TING MAKE MAIN UNIT APART FROM THE MOTOR AND SWITCH WHICH COMES FROM SUZHOU PROFESSIONAL -switch N446219 is not available as spare part but US take the part direct from supplier Defond (20015756) so may be able to get through Fort Mill if needed - check with supply team if can go direct to Defond Item N446219 has been discontinued in Fort Mill and replaced by N474607 (complete stator and module Item 332) Cindy.Munters 16.08.18 | GB | Live |
|
|
| 436 | 2 | DCS7485 | TABLE SAW | 2 | GB | Under Development |
|
||
| 15 | 11 | DCW200 | RANDOM ORBITAL SANDER | 1 | 1/4 SHEET DCW200N-XJ RUSSIA TAKING | GB | Live |
|
|
| 131 | 1 | DHS780 | MITRE SAW | 21 | IEC CHANGES | GB | Live |
|
|
| 131 | 1 | DHS780 | MITRE SAW | 20 | 2 X 54 VOLT MITRESAW - MAIN UNIT FROM CHANG TYPE MOTOR PUMPKIN PARTS FROM SUZHOU PROF DHS780T2A-GB+LX - Discontinued via the 2017 global NOD list | GB | Live |
|
|
