SAFETY CAP Type | N462141
General Details
| Status | Active |
| Substitute Part Number | |
| Variant Description | n/a |
Download Area / Documents
Where Part is Used
| Item No. | Qty Per | Product Number | Product Description | Type | Other Info | Markets | Product Status | Last Date of Manuf. | Diagram |
|---|---|---|---|---|---|---|---|---|---|
| 867 | 1 | DCC1054 | COMPRESSOR | 1 | GB | Live |
|
||
| 867 | 1 | DCD240 | MIXER | 1 | GB | Live |
|
||
| 867 | 1 | DCD460 | CORDLESS DRILL | 1 | GB | Live |
|
||
| 867 | 1 | DCD470 | RIGHT ANGLE DRILL | 1 | GB | Live |
|
||
| 867 | 1 | DCG200 | WALL CHASER | 1 | GB | Live |
|
||
| 867 | 1 | DCG414 | SMALL ANGLE GRINDER | 2 | GB | Discontinued | 31/07/2018 |
|
|
| 867 | 1 | DCG414 | SMALL ANGLE GRINDER | 3 | AK61 MODULE - still need new part numbers for module and rating plates -Robinson Lu and Tao Huang | GB | Live |
|
|
| 867 | 1 | DCG414 | SMALL ANGLE GRINDER | 1 | 54 VOLT CORDLESS - NO INTERNALS OF BACK END REPAIRED DUE TO CANADA GLUE ISSUE | GB | Discontinued | 31/12/2016 |
|
| 867 | 1 | DCG418 | ANGLE GRINDER | 1 | SAME AS DCG414 WITH UPGRADED MOTOR CHECK MOTOR AND SWITCH SA IS SAME AS NA PART N825069 - RICK ZONG SAYS YES RU TAKING XJ SKU | GB | Live |
|
|
| 867 | 1 | DCG418X2 | ANGLE GRINDER | 2 | B1 | Live |
|
||
| 867 | 1 | DCG4610T2 | ANGLE GRINDER | 1 | DCG414 TYPE 3 WITHOUT GUARD AND WITH 5" CONCRETE GUARD | GB | Live |
|
|
| 871 | 1 | DCH323 | ROTARY HAMMER DRILL | 1 | GB | Live |
|
||
| 871 | 1 | DCH333 | ROTARY HAMMER DRILL | 1 | GB | Discontinued | 28/04/2012 |
|
|
| 871 | 1 | DCH334 | HAMMER DRILL | 1 | GB | Live |
|
||
| 871 | 1 | DCH335X2 | HAMMER DRILL | 1 | GB | Live |
|
||
| 867 | 1 | DCH481 | ROTARY HAMMER | 1 | GB | Live |
|
||
| 867 | 1 | DCH614 | ROTARY HAMMER DRILL | 1 | GB | Live |
|
||
| 867 | 1 | DCH733 | ROTARY HAMMER | 2 | GB | Live |
|
||
| 867 | 1 | DCH733 | ROTARY HAMMER | 1 | GB | Live |
|
||
| 867 | 1 | DCH735 | ROTARY HAMMER | 1 | GB | Under Development |
|
||
