BOOT Type | 631563-00
General Details
| Status | Active |
| Substitute Part Number | |
| Variant Description | n/a |
Download Area / Documents
Where Part is Used
| Item No. | Qty Per | Product Number | Product Description | Type | Other Info | Markets | Product Status | Last Date of Manuf. | Diagram |
|---|---|---|---|---|---|---|---|---|---|
| 22 | 1 | DC300 | CORDLESS CIRCULAR SAW | 1 - EU | 36 VOLT REYNOSA - EUROPEAN UNIT QU AND XE OPPOSITE HAND DC300K----A KL discontinued and replaced by the M2 versions (only difference is battery) NOD 558 = DC300KN-XJ + DC300M2-GB-QW | GB | Discontinued | 01/03/2016 |
|
| 22 | 1 | DC300KL | 36V Circular Saw | 1 | GB | Discontinued |
|
||
| 49 | 1 | DC301K | CORDLESS CIRCULAR SAW | 1 | 36V (REYNOSA) version with blade on Left hand side EURO are taking this with blade on LH side | GB | Discontinued | 31/01/2017 |
|
| 69 | 1 | DC351KL | CORDLESS PLUNGE SAW | 1 - EU | GB | Discontinued | 01/08/2008 |
|
|
| 6 | 1 | DC411 | SMALL ANGLE GRINDER | 2 | MD09 - GB obsoleted on NOD 215 DC411KL-GB+QW = NOD 313 DC411KB-QW = NOD313 DC411KB-GB = NOD 391 DC411KA-GB+QW = NOD 451 DC411N-XJ = NOD 498 DC411KA = NOD 16-090 | GB | Discontinued | 31/12/2013 |
|
| 6 | 1 | DC411 | SMALL ANGLE GRINDER | 1 | 18 VOLT NANO | GB | Discontinued | 26/04/2010 |
|
| 6 | 1 | DC413KL | 28V NANO SAG | 1 | GB | Discontinued |
|
||
| 6 | 1 | DC415 | SMALL ANGLE GRINDER | 2 | 36 VOLT CORDLESS TYPE 2 MD09 NOD 554 = DC415N-XJ NOD 558 = DC415KN-XJ + DC415M2-GB-QW | GB | Discontinued | 01/03/2016 |
|
| 6 | 1 | DC415 | SMALL ANGLE GRINDER | 1 | GB | Discontinued | 23/06/2010 |
|
|
| 6 | 1 | DC415KL | CUT OFF | 1 | GB | Discontinued |
|
||
| 30 | 1 | DCF889 | IMPACT WRENCH | 2 | GB | Discontinued | 01/10/2015 |
|
|
| 6 | 1 | DCG412 | ANGLE GRINDER | 1 | GB | Discontinued | 31/07/2015 |
|
|
| 6 | 1 | DCG422 | SMALL ANGLE GRINDER | 1 | (DCG422 is 14.4v version of DCG412) DCG422M2-GB = NOD 501 DCG422-EC + DCG422KN-EC = NOD 522 DCG422M2-GB+QW - DCG422N-XJ = NOD 521 Range type change to introduce new motor - this unit will not be included - Tim Watson to raise a NOD (24-10-14) | GB | Discontinued | 31/12/2014 |
|
| 13 | 1 | DCS373 | CORDLESS CIRCULAR SAW | 1 | DCS373KN BUILT IN REYNOSA - METAL CUTTING SAW BLADE = DT1212-QZ manuals not available 21/11/2012 (Euro = N168887) (XE = N201532) DCS373L2 Never introduced (NOD 12-124) will be superseded by DCS373M2 NOD 553 = DCS373M2-GB (Replaced by DCS373N-XJ) | GB | Discontinued | 02/12/2015 |
|
| 123 | 4 | SCMT50278 | DRAWER CABINET | 1 | XD | Discontinued |
|
||
| 123 | 4 | SCMT50278 | DRAWER CABINET | 2 | GB | Discontinued |
|
||
| 123 | 4 | SCMT50278 | DRAWER CABINET | 1 | GB | Discontinued |
|
||
| 123 | 4 | SCMT50278 | DRAWER CABINET | 3 | GB | Discontinued |
|
||
| 123 | 4 | SCMT50278 | DRAWER CABINET | 1 | B1 | Discontinued |
|
||
| 123 | 4 | SCMT50278 | DRAWER CABINET | 2 | B1 | Discontinued | 01/08/2001 |
|
|
