BEARING NEEDLE Type | 391616-00
General Details
| Status | Active |
| Substitute Part Number | |
| Variant Description | n/a |
Download Area / Documents
Where Part is Used
| Item No. | Qty Per | Product Number | Product Description | Type | Other Info | Markets | Product Status | Last Date of Manuf. | Diagram |
|---|---|---|---|---|---|---|---|---|---|
| 7 | 1 | 2600 | 3/8 HOLGUN | 1 | GB | Live |
|
||
| 66 | 1 | B4052 | 7IN/9IN 6000RPM SNDR | 2 | GB | Discontinued |
|
||
| 66 | 1 | B4052 | 7IN/9IN 6000RPM SNDR | 1 | GB | Discontinued |
|
||
| 66 | 1 | B4052 | 7IN/9IN 6000RPM SNDR | 3 | GB | Discontinued | 01/02/2010 |
|
|
| 66 | 1 | B4052 | 7IN/9IN 6000RPM SNDR | 4 | GB | Discontinued | 01/03/2011 |
|
|
| 66 | 1 | B4052 | 7IN/9IN 6000RPM SNDR | 5 | GB | Discontinued | 01/05/2011 |
|
|
| 100 | 1 | BD575E | CUT SAW | 3 | GB | Discontinued |
|
||
| 100 | 1 | BD575E | CUT SAW | 1 | GB | Discontinued |
|
||
| 100 | 1 | BD575E | CUT SAW | 2 | GB | Discontinued |
|
||
| 195 | 1 | BD620R | CORDLESS DRILL | 20 | GB | Live |
|
||
| 195 | 1 | BD620R | CORDLESS DRILL | 21 | GB | Live |
|
||
| 75 | 1 | D26480 | BELT SANDER | 1 | GB | Discontinued |
|
||
| 29 | 1 | D27105 | COMBINATION SAW | 1 | Also attached information on D27105V - Items 302/303/304. ONLY 1 PART SHOWED UP ON THE UNIQUE PARTS | GB | Discontinued | 01/11/2006 |
|
| 29 | 1 | D27105 | COMBINATION SAW | 2 | NOD 267 | GB | Discontinued | 01/11/2007 |
|
| 29 | 1 | D27107 | COMBINATION SAW | 2 | Changed type to use Motor manufactured in Tatry. All other parts unchanged. | GB | Discontinued | 31/12/2009 |
|
| 29 | 1 | D27107 | COMBINATION SAW | 1 | Only built as 230volt.....As from wk 1 2009 XC version made obsolete, suva guard no longer fitted. | GB | Discontinued | 01/09/2009 |
|
| 29 | 1 | D27107 | COMBINATION SAW | 6 | Changes made to Guarding & Riving Knife. No user manual in windchill for this type change as at 20-06-2014 NT275 | GB | Live |
|
|
| 29 | 1 | D27107 | COMBINATION SAW | 5 | Type change to accommodate the new Pulley fixing design. Heat is used to expand the pulley before pressing to Armature and Gear shafts. | GB | Discontinued | 20/06/2014 |
|
| 29 | 1 | D27107 | COMBINATION SAW | 4 | Changes made to Guarding and added a Material Clamp. | GB | Discontinued | 31/03/2013 |
|
| 29 | 1 | D27107 | COMBINATION SAW | 7 | FIELD PROCESS IMPROVEMENT NT338 | GB | Live |
|
|
