WARNING LABEL Type | 610707-00

General Details
Status | Active |
Substitute Part Number | |
Variant Description | n/a |
Download Area / Documents
Where Part is Used
Item No. | Qty Per | Product Number | Product Description | Type | Other Info | Markets | Product Status | Last Date of Manuf. | Diagram |
---|---|---|---|---|---|---|---|---|---|
154 | 2 | D24000 | TILE CUTTER | 1 | GB | Discontinued | 01/12/2007 |
![]() |
|
154 | 2 | D24000 | TILE CUTTER | 2 | NOD 255 - CH + GB and LX "V" versions NOD 489 = D24000S-GB+LX | GB | Live |
![]() |
|
124 | 2 | D27105 | COMBINATION SAW | 2 | NOD 267 | GB | Discontinued | 01/11/2007 |
![]() |
124 | 2 | D27105 | COMBINATION SAW | 1 | Also attached information on D27105V - Items 302/303/304. ONLY 1 PART SHOWED UP ON THE UNIQUE PARTS | GB | Discontinued | 01/11/2006 |
![]() |
124 | 2 | D27107 | COMBINATION SAW | 5 | Type change to accommodate the new Pulley fixing design. Heat is used to expand the pulley before pressing to Armature and Gear shafts. | GB | Discontinued | 20/06/2014 |
![]() |
124 | 2 | D27107 | COMBINATION SAW | 4 | Changes made to Guarding and added a Material Clamp. | GB | Discontinued | 31/03/2013 |
![]() |
124 | 2 | D27107 | COMBINATION SAW | 1 | Only built as 230volt.....As from wk 1 2009 XC version made obsolete, suva guard no longer fitted. | GB | Discontinued | 01/09/2009 |
![]() |
124 | 2 | D27107 | COMBINATION SAW | 6 | Changes made to Guarding & Riving Knife. No user manual in windchill for this type change as at 20-06-2014 NT275 | GB | Live |
![]() |
|
124 | 2 | D27107 | COMBINATION SAW | 3 | Machinery directive MD09 | GB | Discontinued | 01/06/2012 |
![]() |
124 | 2 | D27107 | COMBINATION SAW | 7 | FIELD PROCESS IMPROVEMENT NT338 | GB | Live |
![]() |
|
124 | 2 | D27107 | COMBINATION SAW | 2 | Changed type to use Motor manufactured in Tatry. All other parts unchanged. | GB | Discontinued | 31/12/2009 |
![]() |
124 | 2 | D27107XPS | COMBINATION SAW | 3 | Type change to accommodate the new Pulley fixing design. Heat is used to expand the pulley before pressing to Armature and Gear shafts. GB + LX = NOD 425 (Serviceability returned just N203384 Rting plate-GB = Added to type change review) | GB | Discontinued | 20/06/2014 |
![]() |
124 | 2 | D27107XPS | COMBINATION SAW | 4 | Changes made to Guarding & Riving Knife. No user manual in windchill for this type change as at 20-06-2014 NT275 GB+LX - Discontinued via 2017 global NOD list = 17-11-17 | GB | Discontinued | 17/11/2017 |
![]() |
124 | 2 | D27107XPS | COMBINATION SAW | 2 | Changes made to the Guarding | GB | Discontinued | 31/03/2013 |
![]() |
124 | 2 | D27107XPS | COMBINATION SAW | 1 | With LED. No LX version produced. | GB | Discontinued | 01/06/2012 |
![]() |
217 | 2 | DCS365 | MITRE SAW | 1 | Cordless Mitre Saw. Motor top half is manufactured by Reynosa and shipped to Tatry for assembly onto the Base. Top Half parts are not supported from Tatry only from Fort Mill. The Base is supported by Tatry. Still need wiring harness programmed from reynosa (Item 9) N466092 DCS365M2-XE = 2018 Global NOD List - WK32 | GB | Live |
![]() |
|
30 | 2 | DCS727 | MITRE SAW | 1 | KIT FOR BOTH SIDE HANDLE EXTENSIONS IS N714377 IF NEEDED - SET UP INDIVIDUALLY kit for screws and washers for side handle = N714372 - set up individually GB UNIT TAKE EURO MANUAL 02/09/2019 KR MANUAL N774988 - NO DOC 01/10/2019 | GB | Live |
![]() |
|
7 | 2 | DW017 | MITRE SAW | 1 | GB | Discontinued | 01/06/2006 |
![]() |
|
7 | 2 | DW712 | MITRE SAW | 1 | Field being changed to a 2 wire system. 4 wire fields (389532-00 & 391318-01) still available | GB | Discontinued | 01/04/2006 |
![]() |
217 | 2 | DW717XPS | MITRE SAW | 5 | TYPE CHANGE DUE TO CHANGES TO FIELD AND FOR CHANGE OF TESTING BOARD FROM TUV TO VDE -NT314 cn0293898 subs N020376 to N075469 and N017897 to N075468 but service take kit 5140117-90 so leaving alone | GB | Discontinued | 30/08/2019 |
![]() |
